IKSUNCurtain Hardware

· IKSUN

Curved and Bendable Curtain Tracks: How to Specify One for a Bay or Corner Opening

A bay window, an arched opening and a hospital cubicle do not fail on length. They fail on shape. A straight body is cut to a dimension, a telescopic pair is extended on site and a splice joins two lengths. None of the three follows a curve. A curved opening needs a body that bends, and that is a different extrusion question from every other body in the range.

This guide sets out what a bendable curtain track body is, what the IKSUN curved catalogue covers, where the powered range stops, and which fields a curved track order has to specify before anything is cut.

A curve is a different problem from a length

Every length problem in the range has an answer: a body cut to the room dimension, a telescopic pair that slides together on site, or a splice body that joins two lengths permanently. The telescopic and splice body comparison sets out that choice in full.

None of them solves a shape. A bay window, a corner or an arched wall needs a body that changes direction, and a body that changes direction cannot be a straight extrusion cut to a length. The bend is made in the profile, so the pattern has to come from the opening itself.

What a bendable body is

A bendable track is an aluminium profile that is formed to a radius after it has been extruded. It is not a straight profile cut and bent on site, and it is not a flexible plastic rail. The section is fixed by the extrusion die; what the supplier sets is the radius the body is formed to and the pattern it follows.

That is why the order for a curved track is a pattern and not a length. The buyer sends the opening: the width of each facet, the angle of each corner and the total run. The supplier forms the body to match it. Where the opening is measured on site, the pattern is confirmed on the drawing before production, in the same way as any other dimension on a curtain track order.

What the curved catalogue covers

The bendable bodies are a separate line in the IKSUN range, because they are formed rather than cut. The straight extrusion bodies and their published masses are on the track profiles page, and the accessories a project needs are covered on the curtain track accessories page.

The bendable range is listed in one place, with the length options and the finish reference for each entry:

Curved curtain track in the IKSUN store

Two materials sit in the curved group, and they are not interchangeable. Aluminium bodies, including 6063 and 6063-T5, are the structural range: they are used for bay windows, arched openings, corners and hospital cubicles. Flexible PVC bodies are a light-duty rail for dividers and small domestic openings, and they are not a substitute for an aluminium body on a project run.

The length options are published per product rather than as one range. The common ladder is four fixed sizes: 1.5 m, 2 m, 2.5 m and 3 m.

Longer products reach 5 m for the flexible PVC rail, and 5.8 m to 6.7 m for hospital cubicle and transfusion work.

There is also a 6 m custom shape product, and a 19 ft to 22 ft product for hospital cubicle work.

Where the powered range stops

This needs to be said plainly, because it is the question every buyer asks first. The powered extrusion catalogue carries the telescopic bodies and the splice bodies as separate entries. There is no bendable body on the current tooling. A curved opening is therefore not served by a powered bendable track today.

The bendable bodies in the curved group are manual, so the curved section of a project is pulled by hand and the drive stays on the straight sections beside it. The powered products filed in the same group are straight motorized tracks, not bendable bodies. If the whole opening has to be powered, the question to raise is whether a bendable body can be tooled for the drive, not which motor to buy. The motor compatibility page covers what the powered range does offer.

The fields a curved track order has to specify

A curved track order carries more fields than a straight one, because the pattern has to travel with the quantity. The curtain track purchase specification lists the fields a straight order has to specify; the table below adds the ones a bendable body needs. Each line is an item on the order, not a figure IKSUN publishes.

Curved and bendable curtain track: the information to specify before ordering
Item to fixWhat the catalogue offersWhat to confirm before ordering
MaterialAluminium 6063 or 6063-T5, or flexible PVCThat the alloy and the wall thickness suit the opening
LengthFour fixed sizes from 1.5 m to 3 m, and longer project productsThe cut length of each facet and the total run
ShapeBay and arc windows, arched openings, L-shape and U-shape cornersThe facet widths, the corner angles and the bend pattern
Bend radiusSet per section rather than published as one valueThe forming limit of the selected section, and the radius it can hold
MountingCeiling, wall and top mountingThe fixing method and the bracket spacing on a curved run
Track configurationSingle track and double trackThe bracket count and the fixing for a shared or a separate run
OperationManual sliding, with end stops for the runThat the end stops can be positioned clear of the bend
Curtain headingWave, ripple fold and S-fold carriersThat the carriers supplied fit the bendable body

Ask for the quotation on the same basis as any other order

The entry, the quantity, the length and the destination are the fields a quotation is written against. The curtain track quotation checklist sets out what makes two quotations comparable, and the bend pattern is added to them for a curved body.

Ask for a formed sample, not a straight one

A straight sample tells you about the section and the finish. It tells you nothing about the bend, because the bend is made to your opening. For a curved body, ask for a sample of the formed run, or for the bend radius and the forming limit to be confirmed on the drawing before production. The curtain track sample inspection checklist sets out what a sample approval should record.

The opening has to be measured before the pattern is drawn, and the facet widths are the numbers that matter rather than the overall span. The how to measure a curtain track covers how a curtain track is measured, including the tolerance the run has to hold.

FAQ

What is a bendable curtain track?

A profile that is formed to a radius after it has been extruded, so that it follows a bay window, an arched opening or a corner. It is not a straight profile cut to length, and it is not a flexible plastic rail.

Can a curved curtain track be motorized?

Not from the current powered tooling. The powered extrusion catalogue carries the telescopic bodies and the splice bodies as separate entries and has no bendable body, so the bendable bodies in the curved group are manual. A powered project keeps the drive on the straight runs and runs the bend by hand.

What is the minimum bend radius for a curtain track?

It is set by the section being formed, not by a catalogue figure, so it is confirmed per entry on the drawing and the quotation. Ask the supplier for the forming limit of the profile you intend to use before the pattern is drawn.

How long is a curved curtain track?

The length is published per product, and the common ladder is four fixed sizes: 1.5 m, 2 m, 2.5 m and 3 m. A curved run is also the sum of its facets, so the pattern and the length are confirmed together.

Are PVC bendable tracks suitable for a hotel or a hospital?

The PVC bodies are a light-duty flexible rail for dividers and small domestic openings. A hospital cubicle, a transfusion bay or a hotel room run is an aluminium body: the aluminium bodies cover bay and arc windows, arched openings, L-shape and U-shape corners and cubicle work.

Send your curved track requirements to IKSUN with the opening pattern, the lengths and the finish you need confirmed.