IKSUNCurtain Hardware

· IKSUN

Curtain Track Sample Inspection: What to Check Before Approving a Bulk Order

Before approving a curtain track sample, decide what you need that sample to prove. A short profile section can help you review its shape and finish. For approval of curtain movement, installation fit and the ordered configuration, request an assembled sample that represents the intended system.

Use the following checklist to define the inspection with your supplier. Record the agreed requirements before testing, then attach the results to your purchase order.

Start with an identifiable sample

Ask the supplier to label the sample with the product model, profile or mould number, drawing revision, finish and included accessories.

For a motorized system, also record the exact motor model, drive components, power supply and control method. For a manual telescopic system, record the inner and outer track combination and the proposed installed length.

The IKSUN track profile catalogue identifies profiles by item and mould number. Use those identifiers when requesting a drawing or sample, so approval refers to a specific profile.

A practical sample inspection checklist

This is a suggested buyer worksheet. Agree on acceptance criteria with the supplier; the table does not establish universal tolerances, load limits or service-life requirements, and does not report completed tests.

Curtain track sample approval worksheet
Inspection itemWhat to request or checkWhat to record
Product identityMatch the sample label to the quotation and drawing.Model, profile number and revision
DimensionsCompare agreed dimensions with the approved drawing.Measurements and drawing references
Surface finishInspect visible faces under agreed viewing conditions.Finish reference and photographs
Runner movementOperate the assembled sample across the intended travel path.Any catching, interruption or inconsistent movement
Joints and transitionsInclude the joints or telescopic transitions intended for the order.Component arrangement and observations
Telescopic adjustmentAssemble at the proposed installed length using the supplier’s overlap instructions.Installed length and confirmed minimum overlap
MountingTrial-fit the specified brackets to a representative installation detail.Bracket type, fixing method and access
Motorized operationCheck the exact ordered motor, drive and control combination.Component models and operating results
Integrated lightingFor illuminated configurations, check the agreed light strip, supply and controls.Component references and operating observations
Packing and contentsCount parts against the agreed bill of materials.Quantities, labels and missing items

Mark each item accepted, correction required or not evaluated. An unchecked item should remain visible in the approval record.

What should you check on a manual telescopic track?

Request a representative assembled sample from the selected manual telescopic curtain track range. Identify the exact model, such as the Generation 8 manual telescopic track, if that is the configuration you intend to order.

Ask the supplier to confirm the adjustment range, minimum overlap, curtain load and bracket arrangement for your intended configuration. Enter the confirmed values in the worksheet before approving the sample.

During the trial installation, check whether the track can be adjusted and secured as instructed. Move the carriers through the transition between sections and record any point that needs correction. If your order covers several installed lengths, agree which configurations the sample approval covers and which require additional review.

What should you check on a motorized track?

Specify the complete combination you intend to buy: track profile, motor model, drive components, power supply, controls and opening arrangement.

The recessed built-in motorized track lists Somfy and Jialisi interfaces and requires sample confirmation for other motor brands. Record the exact interface and motor model in your approval.

Ask for a demonstration using the agreed curtain weight and installed configuration. Record opening and closing operation, stopping behaviour, control response and any adjustments required. For the AT81 motorized track with integrated COB lighting, include the ordered lighting supply and control arrangement in the inspection scope.

For recessed installations, request an installation drawing that shows the complete assembly and access requirements. Keep the profile dimensions and the proposed ceiling opening as separate fields for supplier confirmation.

Tie sample approval to the quotation

Before comparing sample prices, ask each supplier to list what is included: profile only, assembled track, brackets, runners, motor, controls, packaging and delivery.

Use the same scope for the bulk quotation. Ask suppliers to explain any component differences between the approved sample and the proposed production order. The curtain track quotation checklist helps you match the scope.

A useful written approval statement is:

Approved for the configuration and inspection items recorded in the attached sample report. Items marked “not evaluated” require separate confirmation.

Keep the report, photographs, drawing revision and bill of materials together. Ask the supplier to identify proposed substitutions before production.

FAQ

Can I approve an order from a short profile sample?

Use it to approve only the items you actually inspect. Request an assembled sample when movement, mounting or system operation forms part of your acceptance criteria.

What tolerance should I use for telescopic dimensions?

Request the drawing and agree on tolerances for the specific model and configuration. Include the confirmed adjustment range and minimum overlap in the approval record.

Does a successful demonstration establish a load rating?

Treat it as an observation of the demonstrated configuration. Request the supplier’s stated load rating, applicable conditions and supporting documentation separately.

Should I request another sample after a component changes?

Ask the supplier to identify which approved requirements the change affects. Agree whether a new sample, drawing review or additional demonstration is needed before accepting the substitution.

What should I send with a sample enquiry?

Send the intended installed length, curtain weight, mounting detail, opening arrangement, destination electrical requirements where applicable, and the components you expect to receive.

Send your sample requirements to IKSUN with the configuration and inspection items you want confirmed.