IKSUNCurtain Hardware

· IKSUN

Curtain Track Purchase Specification: What to Confirm Before an OEM Order

Two quotations can both read “motorized curtain track, 4 m” and still describe different products: a different extrusion, a different motor interface, or a different component scope. A written purchase specification is what ties the drawing, the approved sample, the quotation and the packing list to one identified product.

A curtain track order passes through profile selection, surface treatment, deep processing, assembly, inspection and export packing. Aluminium extrusion and surface treatment are supplied by Foshan Qiaoze Aluminum Co., Ltd., a sister company under the same ownership, while IKSUN's own plant carries out deep processing, assembly, inspection and export. Every handover reads the same order file, so a missing field becomes a default that may not match the project.

The fields a specification must fix

Fields to state before an OEM curtain track order
FieldWhat to stateWhere the value comes from
Profile identityMould number, theoretical kg/m, drive familyTooling catalogue / profile table
Section and ceiling interfaceApplicable drawing, pocket or body section, mounting methodProduct specification for the chosen family
Finish and colourSurface treatment, colour reference, matching componentsProduct craft field and order confirmation
Motor and controlMotor interface, motor supplier, controls, opening arrangementConfiguration sheet
Component scopeCarriers, belt, brackets, end locks, splices, lighting partsBill of materials
Cut lengths and packingLength and quantity per size, bundle or carton, destinationOrder schedule and market packing data
Compliance documentsCertificate copies matching the ordered modelFactory page downloads
Commercial basisQuantity, destination country, quotation referenceQuotation and contact record

1. Name the mould number

Every IKSUN track body is quoted by its mould number — the die identification the factory uses — together with its theoretical mass per metre for freight calculation. The tooling list holds 38 motorized curtain track profiles plus additional dies for motor housings and accessories, with published body masses from 0.315 kg/m to 1.13 kg/m. It also records a drive family for each body: Jialisi, Somfy, or a universal belt-drive profile quoted without a motor.

Write all three into the specification: mould number, kg/m and drive family. Use the complete mould-number and kg/m profile table to fix this line first.

2. Fix the section and ceiling interface

Sections are family-specific. The recessed built-in track is produced in two ceiling-pocket sections, 41.97 × 21.7 mm and 40 × 26 mm. The WR510 is a 31.1 × 22.5 mm square track with a downward-facing LED channel. The AT81 integrated motor-and-light track has a 2.0 mm thickened rail wall and a belt with stranded steel wires rated at a tensile resistance of at least 600 N.

Name the drawing that applies; do not carry a dimension from one family to another. Where a ceiling pocket is involved, state the pocket section, plasterboard thickness and bracket arrangement together, then check the dimensions and installation guide.

3. Fix the finish and colour before production

The product specification for the AT81, the recessed built-in track and the WR510 lists electrophoretic coating as the product craft; the recessed specification describes its finish as moisture-proof and heat-resistant and records finishing in the project colour. Anodising, electrophoretic coating and powder coating are supplied by Foshan Qiaoze Aluminum Co., Ltd., a sister company under the same ownership, while assembly and export are handled in IKSUN's own plant.

Colour is a production decision. For the WR510 it must be fixed at order because the finish is applied to the full bundle. State the treatment, the colour reference and which components must match. See the surface finish guide for the treatment options.

4. State the motor interface and component scope

The recessed built-in track body is made in Somfy and Jialisi motor interfaces, so a distributor can keep one motor inventory across projects. The motorized range is organised into four families: an integrated motor-and-light track (AT81), a recessed built-in track, an LED square track (WR510) and the belt-drive profile range.

Name the interface and who supplies the motor and controls, then itemise the parts that make the assembly installable: carriers, drive belt, ceiling brackets, end locks, splice components for joined runs, and — for illuminated tracks — light strips and power adapters. WR510 is supplied in 6.7 m standard lengths at 30 pieces per bundle, with sealing, rolling beads, top code brackets and one power adapter and light strip per piece; its published limitations note that the light strip and adapter are ordered to the strip length, so a 5 m run is not simply cut from a 6.7 m extrusion.

“Complete set” is not a component list. Replace it with an itemised scope before signing.

5. Separate cut lengths, packing and destination

Cut length and quantity per length determine the linear metres; packing determines what can be shipped. The WR510 figures above apply to that product — other families are packed to their own schedule. IKSUN produces packing data per market and exports to named markets including Canada, Australia, Russia, Europe, the Middle East, Southeast Asia, Japan and Africa.

Before booking freight, request a final packing list with package quantity, dimensions, net weight and gross weight. A profile weight calculation covers the aluminium profile only; it excludes motors, hardware, accessories, cartons and pallets. The packaging and export page covers the packing side.

6. Attach the compliance documents

CE EMC and CE LVD certificates are held against the motorized curtain track range, and CE RoHS against the curtain track; the certificate PDFs are published on the factory page. The company also holds ISO 9001:2015 certification, registration number 12426Q00937R101, valid until 2029-10-13, and that certificate is downloadable too.

State which documents must accompany the order and file the current PDFs with it, matching the ordered model. The certificates section on the factory page holds the downloadable originals.

Common gaps that cause rework

  • The mould number is missing, so drawing, sample and quotation cannot be tied to one extrusion.
  • Colour is chosen after surface treatment has been applied to the bundle.
  • The motor interface is assumed to be the same as the last order.
  • Accessories are covered by “complete set” instead of an itemised list.
  • The final packing list is requested after freight has been booked.
  • Certificate copies are never attached to the buyer's order file.

How to send the specification

A quotation needs the profile or mould number, a quantity and a destination country. Send the specification as one document with the drawing, the approved sample reference and the component list, so the quotation, the sample inspection checklist and the quotation checklist all refer to the same configuration. IKSUN quotations are handled by one sales team at bbsyiyi@gmail.com or on WhatsApp +86 180 3323 8456.

Frequently asked questions

Can a specification be based on a product name alone?

No. A product name does not identify the extrusion, drive interface or component scope. Record the mould number, kg/m and drive family.

Does the mould number also fix the finish and colour?

No. They are separate fields. The tooling list identifies the extrusion; the order confirmation fixes the surface treatment and colour.

Should colour be confirmed at sample approval or at order?

For the WR510 it must be fixed at order, because the electrophoretic finish is applied to the full bundle. Treat colour as an order-level decision for any family finished in bundles.

Do I need to state the motor if I only buy the track body?

Yes. State the drive interface and who supplies the motor and controls. Some profiles are quoted without a motor.

Is a profile weight calculation enough to book freight?

No. It covers the aluminium profile only. Ask for a final packing list with package quantity, dimensions, net weight and gross weight.

Can I reuse certificates from a previous order?

Ask for the current PDFs that match the ordered model and attach them to the order file. Check the numbers and validity dates against the documents published on the factory page.

Request a specification review with the mould number, cut lengths, quantities, finish, motor interface, component scope and destination, or review the motorized curtain track families first.