· IKSUN
How to Estimate Curtain Track Profile Weight Before Quotation
Importers often need a preliminary shipment weight before the final curtain track quotation and packing list are ready. When the theoretical mass is published, multiply the profile mass in kilograms per metre by the total ordered profile length.
This estimate is useful for early freight comparison and checking whether two suppliers are quoting the same rail body. It is not the final shipment weight: motors, carriers, brackets, belts, controllers, cartons, pallets and protective packing are separate.
The calculation
Profile weight (kg) = profile mass (kg/m) × total ordered length (m)
For example, 50 tracks at 4 m each equal 200 linear metres. A profile weighing 0.446 kg/m has an estimated aluminium profile weight of 89.2 kg. Do not enter that figure as the gross shipment weight.
Published IKSUN profile weights
The tooling reference lists 38 motorized curtain track bodies from 0.315 kg/m to 1.13 kg/m. The representative calculations below use profile weight only.
| Item | Mould | Description | kg/m | 10 m | 100 m |
|---|---|---|---|---|---|
| DD01 | CS101 | Jialisi motorized track | 0.315 | 3.15 | 31.5 |
| DD05 | CP19 | Somfy motorized track | 0.410 | 4.10 | 41.0 |
| DD18 | WR561 | Motorized telescopic inner tube | 0.466 | 4.66 | 46.6 |
| DD19 | WR383 | Motorized telescopic outer tube | 0.515 | 5.15 | 51.5 |
| DD22 | WR486 | Jialisi recessed track | 0.446 | 4.46 | 44.6 |
| DD23 | WR485 | Somfy recessed track | 0.437 | 4.37 | 43.7 |
| DD26 | CP86 | Jialisi track with side-emitting light | 0.634 | 6.34 | 63.4 |
| DD33 | WR576 | Jialisi motorized double track | 1.072 | 10.72 | 107.2 |
| DD36 | WR683 | Somfy track with downward-emitting light | 0.658 | 6.58 | 65.8 |
| DD38 | WR685 | Somfy track with side-emitting light | 0.637 | 6.37 | 63.7 |
| DD42 | WR756 | Jialisi motorized track | 0.499 | 4.99 | 49.9 |
| DD13 | CP83 / MZX-180 | Motorized track | 1.130 | 11.30 | 113.0 |
Use the complete mould-number and kg/m profile table for the selected body.
How to calculate a mixed order
Calculate each profile separately and add the results. For example: 96 m of WR486 at 0.446 kg/m is 42.816 kg; 80 m of CP86 at 0.634 kg/m is 50.720 kg; and 50 m of WR576 at 1.072 kg/m is 53.600 kg. The combined profile-only estimate is 147.136 kg. Round after completing the calculation.
What the calculation excludes
- Motors, controllers, transmission boxes, carriers, end locks and drive belt.
- Brackets, fixings, splice components, lighting strips and power supplies.
- Cartons, protective materials, pallets and export cases.
Request a final packing list showing package quantity, dimensions, net weight and gross weight before booking freight.
Why mould numbers matter
Two quotations may both say “motorized curtain track” while referring to different extrusions. Record the mould or profile number so the drawing, sample, kg/m figure and quotation all identify the same body.
Profile mass does not establish curtain load. Load confirmation depends on the complete configuration, including installed length, support spacing, brackets, fixings, joints and motor. Review the dimensions and installation guide before approving a system.
What to send for a preliminary weight estimate
- Profile or mould number.
- Cut length and quantity for every track size.
- Motor, controller, bracket and accessory scope.
- Splice requirements, destination and transport method.
For a formal comparison, use the curtain track quotation checklist and the sample inspection checklist.
Frequently asked questions
Is kg/m the finished curtain track weight?
No. It is the theoretical mass of the aluminium profile per metre. Finished assembly weight also includes the drive, carriers, brackets, belt, controls and other ordered components.
Can I use profile mass to calculate curtain load capacity?
No. Profile mass identifies the extrusion and supports material and freight calculations. Permissible curtain load must be confirmed for the installed system, support spacing, fixings, joints and motor configuration.
Should telescopic inner and outer tubes be calculated separately?
Yes. They are different profiles with different kg/m values. Use the actual length of each component in the proposed assembly.
Why is the packing-list gross weight higher than this calculation?
The packing list includes motors, hardware, accessories and packing materials. It may also include pallets or cases.
Can I calculate container loading from kg/m alone?
No. Packed length, bundle dimensions, carton count, pallet arrangement and container internal dimensions also affect loading.
Request a configuration-specific estimate with the mould number, cut lengths, quantities, components and destination.