IKSUNCurtain Hardware

· IKSUN

Somfy vs Jialisi Motor Compatibility: A Buyer's Guide

The question is rarely which motor is better. It is whether the track you are buying will accept the motor you already hold, and what has to be confirmed before the order is placed. The answer depends on the drive interface built into the extrusion, not on the brand name printed on the motor.

The short answer

IKSUN builds its belt-drive and recessed bodies with Somfy and Jialisi motor interfaces on the same extrusion, so the mounting method does not decide the motor brand. Of the 38 track bodies in the range, 14 are produced for Jialisi drives, 8 for Somfy drives, and 16 are universal belt-drive profiles quoted without a motor. A buyer can standardise on one brand and keep a single motor stock across a whole project.

How the 38 bodies split by drive

The drive family is a column in the extrusion catalogue, the same list that carries each mould number and its theoretical mass per metre. It is worth reading before a quotation, because it tells you whether a body arrives configured for a motor or arrives as a belt-drive profile to be paired with the brand you stock.

The split is 14 Jialisi-configured bodies, 8 Somfy-configured bodies and 16 universal belt-drive bodies. The universal profiles are quoted without a motor, which is why they are the usual choice for a distributor who already holds one motor brand and does not want to buy a second, configured stock.

Drive family across the IKSUN track range, counted from the extrusion catalogue.
Drive familyBodiesWhat it means for a buyer
Jialisi14 bodiesBodies produced for Jialisi drives
Somfy8 bodiesBodies produced for Somfy drives
Universal belt-drive16 bodiesProfiles quoted without a motor; fit the brand you stock

One extrusion, two motor interfaces

The recessed built-in body is produced in both Somfy and Jialisi interfaces on the same extrusion. The practical effect is that a hotel or a distributor can standardise on one motor brand and hold a single motor stock across every room, while still meeting an architect's stated interface.

This is also why the mounting question and the motor question are separate. A recessed body and a surface body can both be ordered with either interface; the ceiling detail changes the fixing, not the drive.

The universal belt-drive option

Sixteen bodies are universal belt-drive profiles quoted without a motor. A distributor fits the brand already in the warehouse instead of buying a configured body, which keeps the motor inventory to a single line across different projects.

Because the belt drive is the same system used across the configured bodies, the choice between a universal and a configured profile is a stocking decision, not a change to how the curtain runs.

The AT81 integrated option

The AT81 carries its light strip inside the same extrusion as the belt drive, so a curtain box does not need a separate lighting channel. Its rail wall is thickened to 2.0 mm and the drive belt uses stranded steel wires rated at a tensile resistance of at least 600 N.

That 600 N figure is a belt specification, not a curtain load rating. The working load depends on the complete configuration, including installed length, support spacing, brackets, fixings and motor, and must be confirmed for the intended curtain weight. The AT81 is quoted for the interface the project specifies, Somfy or Jialisi.

What to confirm before ordering

The site does not publish a per-model motor rating, the plug type actually supplied or a curtain load figure for a motor. Ask the supplier to confirm the supplied motor model, its input voltage, the rated curtain load and controller compatibility against the installed system before the order is placed.

A quote needs the profile or mould number, a quantity and a destination country. When a project names a motor brand, state the interface on the inquiry so the correct body is configured from the start; the curtain track quotation checklist lists the fields to prepare.

Confirm these against the installed configuration before production.
Item to confirmWhy it matters
Motor modelConfirm the exact model to be supplied, not just the brand
Input voltageMatch the motor supply to the destination market
Curtain loadConfirm the rated load for the complete installed configuration
ControllerCheck the controller and receiver work with the chosen motor

Specification mistakes to avoid

Treating 600 N as a curtain load rating is the common one; it is the belt's tensile resistance, and the load has to be confirmed for the full installed configuration. The second is assuming a third-party motor will fit without a sample: other brands need a physical fit check before they are specified, as the motor compatibility page states. The profile weight calculator explains why kg per metre is not a load figure.

Answers buyers ask

Which motor brands do IKSUN tracks accept?

The belt-drive and recessed bodies are produced with Somfy and Jialisi motor interfaces on the same extrusion. Sixteen universal belt-drive profiles are quoted without a motor, so a distributor can fit the brand already in stock.

How many track bodies are configured for each drive?

Of the 38 track bodies in the range, 14 are produced for Jialisi drives, 8 for Somfy drives and 16 are universal belt-drive profiles quoted without a motor. The split is counted from the extrusion catalogue.

Can I keep one motor inventory across a project?

Yes. Because the recessed and belt-drive bodies accept both Somfy and Jialisi on the same extrusion, a hotel or distributor can standardise on one brand and hold a single motor stock across every room.

Does the mounting method change the motor interface?

No. The recessed and surface bodies run on the same belt-drive range and can be ordered with either interface. The ceiling detail changes the fixing and bracket set, not the drive.

Is the AT81 600 N figure the curtain load it can carry?

No. The 600 N is the drive belt's tensile resistance, a belt specification, not a curtain load rating. The working load depends on the complete installed configuration and has to be confirmed for the intended curtain weight.

Does the AT81 need a specific motor brand?

The AT81 is quoted for the interface the project specifies, Somfy or Jialisi. It carries a 2.0 mm thickened rail wall and a steel-wire belt rated at a tensile resistance of at least 600 N.

What must I confirm before ordering a motorized track?

Confirm the supplied motor model, its input voltage, the rated curtain load and controller compatibility against the installed system. The site does not publish a per-model motor rating or the plug type actually supplied.

Can I fit a motor from another brand?

Other brands need a physical fit check before they are specified. The published interfaces are Somfy and Jialisi on the configured bodies; do not assume a third-party motor fits without a sample.

Send your motor compatibility question to IKSUN Distributors, importers: talk to us. with the motor brand and model, the interface you need, and the profile or mould number you want matched.