Buyer guide
Somfy vs Jialisi Curtain Track Motors | IKSUN
Somfy and Jialisi motors both seat in IKSUN's belt-drive curtain-track profiles, so a project chooses between them on price, local support and control protocol rather than on the track itself. This guide covers how importers and installers specify the right motor - and its voltage - for a Somfy or Jialisi run before the container is booked.
Catalogue imagery
Product photographs & profile drawings
Photographs and cross-section drawings reproduced from the IKSUN product catalogues. These images come from the IKSUN Excel product catalogues; no model number, rating or certification is asserted from a photograph alone. Browse the full image library.



How to decide
What to weigh
Both fit the 38-profile range
Somfy and Jialisi motors both seat in IKSUN's belt-drive profiles, so the track body, bracket and the 0.315 to 1.13 kg/m load maths are the same; the motor is the one swapped part.
Quiet and daily-use rated
Belt-drive system. Confirm the supplied motor model, input voltage, rated curtain load and controller compatibility before ordering.
Match the motor to the site voltage
Motors are specified for the supply they run on: 120V for the United States, 230V for Europe and much of Asia. State the destination country on the enquiry so the rated voltage matches the building.
Plan the lead at the motor end
A motorized run needs power at one end; mains or low-voltage depending on the motor chosen. Mark the motor end on the drawing and IKSUN cuts the body to length with the motor interface built in.
Confirm the control interface
Confirm the motor model, supply voltage, travel-limit setup and remote or voice-control options on the quotation. Supported commands and commissioning steps depend on the supplied controller.
The motor travels with the CE paperwork
The powered track carries CE EMC and CE LVD marks, so the motorised run meets the electrical compliance a distributor or installer is asked for; ask for the certificate PDFs with the quotation.
Key facts
The figures on this page, stated plainly
Certificate scope is model-specific. AT81 appears in the available EMC and LVD model lists; WR510 does not. Check the model list and ordered electrical configuration against the applicable certificate before purchase.
Questions on this guide
Answers buyers ask
Should I choose Somfy or Jialisi for my curtain track?
Both seat in the same IKSUN profiles, so pick on price, local support and the control protocol your project needs; the track body and load maths do not change. Confirm the motor and its protocol on the enquiry.
What voltage do the motors run on?
Motors are specified for the site supply - 120V for the United States, 230V for Europe and most of Asia. State the destination country on the enquiry so the rated voltage matches the building.
Do motorized tracks need wiring?
Yes, power at the motor end - mains or low-voltage by motor. Mark the motor end on the drawing; the factory cuts the body to length with the interface included.
Can the motors join a smart-home system?
Confirm the motor model, supply voltage, travel-limit setup and remote or voice-control options on the quotation. Supported commands and commissioning steps depend on the supplied controller.
Get in touch
Specify your curtain track
Send the profile or mould number, length and quantity - IKSUN returns price, lead time and carton data with the quotation.