Buyer guide
AT81 Light & Motor Track: Deep Dive | IKSUN
The AT81 Curtain Control Master is the IKSUN track that carries the belt drive and the lighting in a single ceiling-mounted extrusion. This deep dive walks the specification an importer or project consultant needs - the rail and belt construction, the integrated COB light, the control options and the ceiling-mounting constraint - using only the figures published for the product.
Catalogue imagery
Product photographs & profile drawings
Photographs and cross-section drawings reproduced from the IKSUN product catalogues. These images come from the IKSUN Excel product catalogues; no model number, rating or certification is asserted from a photograph alone. Browse the full image library.



How to decide
What to weigh
One body, two jobs
The AT81 seats the belt-drive carriers and the COB light strip in the same 6063-T5 aluminium body. Because the light sits inside the track, the curtain box needs no separate channel cut for lighting, which is why the product is aimed at hotel and apartment projects where the box has to carry both.
A 2.0 mm rail built for long spans
The rail wall is thickened to 2.0 mm. The factory states this prevents deformation and distortion along long runs and keeps the surface stable under electrophoretic coating, so the track stays straight where a thinner wall would bow.
A steel-wire belt rated over 600 N
The listed belt tensile resistance is at least 600 N. This is a belt specification, not a curtain load rating. Confirm the complete drive and track configuration for the intended curtain weight. (AT81)
Polarity-free COB lighting
The built-in COB strip has no positive and negative poles to observe when fitting, so there is no risk of wiring the light in reverse during installation. The strip and its power supply ship as part of the track assembly.
Voice control without code pairing
Confirm the motor model, supply voltage, travel-limit setup and remote or voice-control options on the quotation. Supported commands and commissioning steps depend on the supplied controller.
Ceiling mounting only
The AT81 is a ceiling-mounted body with no side-mounted variant. The project drawing must fix the section before production, because the light channel and the drive share one extrusion and the body is cut to the project length.
Key facts
The figures on this page, stated plainly
The IKSUN AT81 integrated motor-and-light track has a 2.0 mm thickened rail wall and a drive belt with stranded steel wires rated at a tensile resistance of at least 600 N.
The AT81 carries its COB light strip inside the same extrusion as the belt drive, so the curtain box needs no separate lighting channel, and the strip has no polarity to observe when fitting.
Questions on this guide
Answers buyers ask
What makes the AT81 different from a standard motorized track?
A standard motorized track carries only the belt drive; lighting has to be added as a separate channel in the curtain box. The AT81 seats the belt-drive carriers and a COB light strip in the same extrusion, so the box needs no separate lighting channel and the light is positioned by the track itself.
What is the AT81 belt load and tensile resistance?
The listed belt tensile resistance is at least 600 N. This is a belt specification, not a curtain load rating. Confirm the complete drive and track configuration for the intended curtain weight. (AT81 · 2.0 mm)
Can the AT81 be wall or side mounted?
No. The AT81 is a ceiling-mounted body only; there is no side-mounted variant. The project drawing has to fix the section before production because the light channel and the drive share the same extrusion.
Which motor and control options does the AT81 use?
Confirm the motor model, supply voltage, travel-limit setup and remote or voice-control options on the quotation. Supported commands and commissioning steps depend on the supplied controller.
Get in touch
Specify your curtain track
Send the profile or mould number, length and quantity - IKSUN returns price, lead time and carton data with the quotation.