IKSUNCurtain Hardware

Buyer guide

LED Light Curtain Tracks | IKSUN

An LED light motorized curtain track carries the curtain control and the room lighting in the same aluminium extrusion, so a hotel, apartment or retail fit-out gets a lit curtain box without a second light channel. This buyer's guide covers the two IKSUN families that carry light - the AT81 integrated motor-and-light track and the WR510 square LED track - and what an importer confirms before ordering a lit run.

Catalogue imagery

Product photographs & profile drawings

Photographs and cross-section drawings reproduced from the IKSUN product catalogues. These images come from the IKSUN Excel product catalogues; no model number, rating or certification is asserted from a photograph alone. Browse the full image library.

IKSUN DD Motorised Curtain Track - product photograph 0022 (from DD电动轨(OK).xlsx)
DD Motorised Curtain Track – product photograph. Source: DD电动轨(OK).xlsx. View all DD Motorised Curtain Track images
IKSUN DD Motorised Curtain Track - technical cross-section drawing 0004 (from DD电动轨(OK).xlsx)
DD Motorised Curtain Track – technical cross-section drawing. Source: DD电动轨(OK).xlsx. View all DD Motorised Curtain Track images
IKSUN Dooya Curtain Motors - product photograph 0148 (from 杜亚产品目录 电机(1).xlsx)
Dooya Curtain Motors – product photograph. Source: 杜亚产品目录 电机(1).xlsx. View all Dooya Curtain Motors images

How to decide

What to weigh

One extrusion carries the belt and the light

The IKSUN AT81 seats its belt-drive carriers and a COB light strip in the same extrusion, so the curtain box needs no separate lighting channel, and the strip is polarity-free - there are no positive and negative poles to observe when fitting.

The square lit track aims the light down

The WR510 is a 31.1 x 22.5 mm square track with a downward-facing LED channel, so the light falls on the curtain rather than across the ceiling - a slim lit run that needs only a shallow slot rather than a full lighting pelmet.

Two families bring the light

The IKSUN motorized range is organised into four families - an integrated motor-and-light track (AT81), a recessed built-in track, an LED square track (WR510) and the belt-drive profile range - so the light option is chosen at the family level, not bolted on afterwards.

A 2.0 mm rail wall holds the lit run

The listed belt tensile resistance is at least 600 N. This is a belt specification, not a curtain load rating. Confirm the complete drive and track configuration for the intended curtain weight. (AT81 · 2.0 mm)

A lit run arrives ready to wire

The WR510 is supplied in 6.7 m standard lengths at 30 pieces per bundle, and each piece ships with its own power adapter and light strip, so the lit track reaches the site as a finished assembly rather than loose components to match.

Confirm the light on the enquiry

A quote needs the profile or mould number, a quantity and a destination country; name the lit variant (AT81 or WR510) on the enquiry so the factory quotes the matching body and its light kit together.

Key facts

The figures on this page, stated plainly

  • The AT81 carries its COB light strip inside the same extrusion as the belt drive, so the curtain box needs no separate lighting channel, and the strip has no polarity to observe when fitting.

  • The IKSUN WR510 is a 31.1 x 22.5 mm square curtain track with a downward-facing LED channel, so the light falls on the curtain rather than across the ceiling.

  • WR510 is supplied in 6.7 m standard lengths at 30 pieces per bundle, with sealing, rolling beads, top code brackets and one power adapter and light strip per piece.

  • The IKSUN AT81 integrated motor-and-light track has a 2.0 mm thickened rail wall and a drive belt with stranded steel wires rated at a tensile resistance of at least 600 N.

  • The IKSUN motorized range is organised into four families: an integrated motor-and-light track (AT81), a recessed built-in track, an LED square track (WR510) and the belt-drive profile range.

Questions on this guide

Answers buyers ask

What is an LED light motorized curtain track?

An integrated motor-and-light track carries its own lighting inside the same aluminium extrusion as the belt drive. The IKSUN AT81 puts a COB light strip and the carriers in one body. The WR510 is a square track with a downward LED channel. Neither needs a separate lighting channel.

Does the AT81 need a separate lighting channel?

No. The AT81 seats the belt-drive carriers and a COB light strip in the same extrusion, so the curtain box needs no separate lighting channel, and the strip is polarity-free - there are no positive and negative poles to observe when fitting.

What size is the WR510 LED square track?

The WR510 is a 31.1 x 22.5 mm square curtain track with a downward-facing LED channel, so the light falls on the curtain rather than across the ceiling. It is supplied in 6.7 m standard lengths at 30 pieces per bundle, with a power adapter and light strip per piece.

How do I order a lit motorized curtain track?

Quote the profile or mould number, a quantity and a destination country, and name the lit variant (AT81 integrated or WR510 square) on the enquiry. The factory quotes the matching body with its light kit; the sales team is reachable at bbsyiyi@gmail.com or WhatsApp +86 180 3323 8456.

Get in touch

Specify your curtain track

Send the profile or mould number, length and quantity - IKSUN returns price, lead time and carton data with the quotation.