Buyer guide
Curtain Track Power Supply 120V vs 230V | IKSUN
A motorized curtain track is an electrical product at heart, so the supply it runs on - 120V in the United States, 230V across Europe and much of Asia - decides which motor the project specifies. This guide covers how importers and installers match IKSUN's Somfy or Jialisi motor options to the building's mains before the container is booked.
Catalogue imagery
Product photographs & profile drawings
Photographs and cross-section drawings reproduced from the IKSUN product catalogues. These images come from the IKSUN Excel product catalogues; no model number, rating or certification is asserted from a photograph alone. Browse the full image library.



How to decide
What to weigh
Two supply worlds
North America runs 120V mains; Europe and most of Asia run 230V. The motor is specified for one, so the destination market decides the model that ships.
The motor is specified, not the track
The aluminium body and belt drive are supply-agnostic; only the motor carries the voltage rating. IKSUN fits Somfy and Jialisi motors, each available in the rating the market needs.
Power reaches the motor end
Every motorized run needs a lead at one end; mains or low-voltage depending on the motor. Reserve a bracket and a routed lead at the motor end on the drawing.
Low-voltage options for retrofits
Where pulling mains is awkward, low-voltage motors take a safer, thinner lead; the project confirms mains versus low-voltage on the enquiry so the right motor ships.
CE marks travel with the powered track
Certificate scope is model-specific. AT81 appears in the available EMC and LVD model lists; WR510 does not. Check the model list and ordered electrical configuration against the applicable certificate before purchase.
Quote the destination, not just the model
A quotation needs the profile or mould number, a quantity and a destination country; the compliance documents and the voltage rating travel with the order.
Key facts
The figures on this page, stated plainly
Certificate scope is model-specific. AT81 appears in the available EMC and LVD model lists; WR510 does not. Check the model list and ordered electrical configuration against the applicable certificate before purchase.
Questions on this guide
Answers buyers ask
Can IKSUN tracks run on 120V?
Yes. For the United States the motors are specified for 120V mains; state the destination country on the enquiry so the rated voltage matches the site.
Do the tracks run on 230V?
Yes. Europe and most of Asia run 230V and the motors are specified accordingly; confirm the market on the enquiry so the right motor ships.
Where does the power connect?
At the motor end of the run - mains or low-voltage by motor. Mark the motor end on the drawing; the factory cuts the body to length with the interface included.
Are the motors CE marked?
Certificate scope is model-specific. AT81 appears in the available EMC and LVD model lists; WR510 does not. Check the model list and ordered electrical configuration against the applicable certificate before purchase.
Get in touch
Specify your curtain track
Send the profile or mould number, length and quantity - IKSUN returns price, lead time and carton data with the quotation.