IKSUNCurtain Hardware

Before you order

Not sure which curtain track to specify?

Answer four questions about the project. We point you to the published family that fits, then carry your answers into the enquiry so the quotation starts from the right profile.

Track selector

The IKSUN motorized curtain track range - The IKSUN motorized range is organised into four families - an integrated motor-and-light track (AT81), a recessed built-in track, an LED square track (WR510) and the belt-drive profile range - and the selector narrows a project to one of them with four questions about installation, power, lighting and mounting.

Families in the range
4
Track bodies
38
Mass per metre
0.315-1.13 kg/m
Motor interfaces
Somfy (8) and Jialisi (14)
Universal belt-drive bodies
16

Track selector

Four questions, one shortlist

1. Where will the track be installed?
2. Does the curtain need a motor?
3. Does the curtain box need integrated lighting?
4. How is the track mounted?
Explore products

Your shortlist appears here. Every family is also listed below.

How to read the four answers

The four questions are deliberately about the project rather than about the product, because that is what a buyer can answer before opening a catalogue. Installation site, whether the curtain is driven at all, whether the curtain box has to carry lighting, and how the track is mounted.

Each answer removes families rather than choosing between them, and the shortlist that comes back is a set of published product pages rather than a recommendation from thin air. The answer also travels into the enquiry form, so the quotation starts from the profile the shortlist points at instead of from a blank question.

What each family is for

The AT81 integrated motor-and-light track carries its COB light strip inside the same extrusion as the belt drive, so the curtain box needs no separate lighting channel and the strip has no polarity to observe when fitting. Its rail wall is thickened to 2.0 mm and the drive belt uses stranded steel wire rated at a tensile resistance of at least 600 N. Choose it when the box has to do two jobs in one profile.

The recessed built-in track is the answer when the pocket already exists in the ceiling. The body is produced in two ceiling-pocket sections - 41.97 x 21.7 mm and 40 x 26 mm - and in Somfy and Jialisi motor interfaces, so a distributor can carry one motor inventory across projects. The published recessed bodies are mould WR485 and WR486 at 0.437-0.446 kg/m.

The WR510 LED square track is a 31.1 x 22.5 mm square section with a downward-facing LED channel, so the light falls on the curtain rather than across the ceiling. It ships in 6.7 m standard lengths at 30 pieces per bundle, with sealing, rolling beads, top code brackets and one power adapter and light strip per piece.

The belt-drive profile range is the answer when the motor is chosen separately. These are universal bodies quoted without a motor, and they are where most of the volume sits - which is why the profile table publishes every mould with its theoretical mass per metre.

When the right answer is a manual track

Some projects are not motorized at all, and specifying a motor to them costs money and creates a service obligation. If the curtain is hand-drawn, the manual telescopic range is a different product family from the motorized tracks and should not be read off the motorized profile table.

IKSUN publishes four manual telescopic generations - generation 1, 7, 8 and 9 - each with its own specification and its own share image. They are hand-operated tracks that extend and retract without a motor, and they are priced and shipped as their own line.

What to send once a family is chosen

A shortlist is the start of a quotation, not the quotation. To turn it into one, send the profile or mould number, the cut length, the quantity and the destination country. From those four the factory returns price, lead time and carton data.

If the project is at the drawing stage, send the drawing. Sizes are customizable to a project drawing, and the recessed built-in track in particular is matched to a pocket dimension rather than to a nominal size.

Key facts

The range the selector draws from

  • The IKSUN motorized range is organised into four families: an integrated motor-and-light track (AT81), a recessed built-in track, an LED square track (WR510) and the belt-drive profile range.

  • The current tooling list holds 38 motorized curtain track profiles, plus 4 additional dies for motor housings and accessories.

  • Of the 38 track bodies, 14 are produced for Jialisi drives, 8 for Somfy drives, and 16 are universal belt-drive profiles quoted without a motor.

  • Every IKSUN track body is quoted by its mould number, which is the die identification the factory uses, together with its theoretical mass per metre for freight calculation.

Get in touch

Still choosing between two?

Send both mould numbers and the opening width, and we will tell you which one fits your motor and your ceiling.

Quick answers

The questions buyers ask at this point

Which curtain track motors do IKSUN tracks work with?

The recessed built-in track has specified Somfy and Jialisi interface options. Compatibility for AT81, belt-drive profiles or other motor brands must be confirmed from the exact profile, motor model and interface drawing.

Which motorized curtain track do I specify for a heavy or wide curtain?

Do not select a track from profile mass alone. Send the installed length, curtain weight, mounting surface and operating requirements so the complete track, motor, carriers, brackets and support spacing can be checked.

Can motorized tracks be customized to a project drawing?

Yes. Product size is customizable and colours are fixed at order, because the electrophoretic finish is applied to the full bundle. Splice and double-track variants are available, and the recessed built-in body is produced in two pocket sections, 41.97 x 21.7 mm and 40 x 26 mm, to match a pocket already drawn by the project architect.

FAQ →