IKSUN logoCurtain Hardware

Tooling reference

Motorized track profile and mass reference

Our motorized range covers 42 profiles and dies: 38 track bodies plus the housing and accessory dies. Track bodies span 0.315 to 1.13 kg/m, and the heaviest die on the whole list is 1.59 kg/m. Quote the mould number in your enquiry and the price comes back against the right die.

How to read this table

Item, mould, drive and mass

The mould number is what the factory quotes against. The item number is our internal index and appears on drawings and quotations. Mass is theoretical and is used for freight estimation, not for invoicing.

Item
Our item index, from DD01 upward. Useful when you are matching an old quotation or a sample label.
Mould
The die number. This is the value to put in your enquiry; it is stable across orders and appears in our packing lists.
Mass
Theoretical kilograms per metre, published for every profile. Multiply by your length to size the container before the quotation.

Profile table

Profile and mass reference

Motorized curtain track profiles with drive family and theoretical mass per metre
ItemMould no.DescriptionDriveFeaturekg/m
DD01CS101Jialisi motorized trackJialisiChamfer inside the tube mouth0.315
DD02CS102Jialisi motorized trackJialisiFlat inside the tube mouth0.347
DD03CS105 / MZX-170Jialisi motorized trackJialisiRibs set high on both sides0.468
DD04CS118Jialisi 1.3B motorized trackJialisiRibs set high on both sides, chamfer inside the tube mouth0.370
DD05CP19Somfy motorized trackSomfy-0.410
DD06CP34 / TC-221Somfy motorized trackSomfy-0.484
DD07CP36Motorized trackBelt drive, motor supplied to orderNo ribs on the inner wall0.537
DD08WR268Motorized trackBelt drive, motor supplied to orderRibs on the inner wall above the bracket seat0.322
DD09CP18 / MZX-182 / TC-222Motorized trackBelt drive, motor supplied to order-0.405
DD10MD930-10-38Motor housingNot a track body-1.092
DD11-Motor outer shellNot a track body--
DD12ABK1813 / MZX-183Motorized trackBelt drive, motor supplied to orderStep on the upper inner wall0.455
DD13CP83 / MZX-180Motorized trackBelt drive, motor supplied to order-1.130
DD14CP36-15BSomfy motorized track 2.0Somfy-0.510
DD15CP36-05Somfy motorized track 2.2Somfy-0.597
DD16OW-94Profile listed without a descriptionNot a track body-(No description recorded; section and mass only)1.595
DD17CS113Motorized trackBelt drive, motor supplied to order-0.400
DD18WR561Motorized telescopic track, inner tubeBelt drive, motor supplied to orderTelescopic0.466
DD19WR383Motorized telescopic track, outer tubeBelt drive, motor supplied to orderTelescopic0.515
DD20CP73Jialisi motorized trackJialisi-0.433
DD21CS470Jialisi motorized trackJialisi-0.446
DD22WR486Jialisi recessed trackJialisiRecessed0.446
DD23WR485Somfy recessed trackSomfyRecessed0.437
DD24CS469Jialisi track with gasket channelJialisiAccepts gasket JT690.430
DD25CP85Motorized trackBelt drive, motor supplied to order-0.619
DD26CP86Jialisi motorized track with lightJialisiSide emitting0.634
DD27CP87Motorized trackBelt drive, motor supplied to order-0.623
DD28CP88Motorized trackBelt drive, motor supplied to order-0.632
DD29CS105AJialisi motorized trackJialisi-0.459
DD30-Motorized vertical blind trackNot a track bodyVertical blind(Recorded without a mould number or a theoretical mass)-
DD31CS455Splice track outer connectorBelt drive, motor supplied to orderSplice0.880
DD32CS456Splice trackBelt drive, motor supplied to orderSplice0.497
DD33WR576Jialisi motorized double trackJialisiDouble track1.072
DD34JM-A20Jialisi motorized trackJialisi-0.415
DD35WR695Motorized trackBelt drive, motor supplied to order-0.489
DD36WR683Somfy motorized track with lightSomfyDownward emitting0.658
DD37WR687Somfy motorized track with lightSomfyDownward emitting0.633
DD38WR685Somfy motorized track with lightSomfySide emitting0.637
DD39CS600Motorized trackBelt drive, motor supplied to order-0.598
DD40WR686Jialisi motorized track with lightJialisiDownward emitting0.633
DD41WR684Motorized trackBelt drive, motor supplied to order-0.693
DD42WR756Jialisi motorized trackJialisi-0.499

The last two entries are housing and accessory dies, not curtain tracks.

Configuration

What is issued with each track

  • 1 motor
  • 1 remote controller
  • 1 pair of transmission boxes
  • 1 pair of carriers (sliding trolleys)
  • 1 internal splice strip
  • 2 stainless steel or plastic hooks
  • 2 stainless steel end locks
  • Ceiling brackets and second-layer brackets
  • N sliding beads to the track length
  • N metres of drive belt as a single run

Profile choice follows the ceiling detail; we confirm the die and the finish before quoting.

Specifying

How to specify a profile in an enquiry

  1. Give the mould number. For example CS105 or WR683. If you only have a sample, send a photograph of the section end and we will match it against the tooling list.
  2. State the drive family. Jialisi and Somfy interfaces are both on the list. If your motor is neither, say so and we will confirm before quoting rather than after.
  3. Give length and total metres. Multiply the metres by the kg/m in the table above to check the container loading before the price arrives.
  4. Name the finish. Electrophoretic coating, anodising and powder coating are all available on these profiles. Colour is fixed at order.

Key facts

The figures on this page, stated plainly

  • The current tooling list holds 38 motorized curtain track profiles, plus 4 additional dies for motor housings and accessories.

  • IKSUN track bodies run from 0.315 to 1.13 kilograms per metre; the lightest is mould CS101 and the heaviest is mould CP83 / MZX-180.

  • Every IKSUN track body is quoted by its mould number, which is the die identification the factory uses, together with its theoretical mass per metre for freight calculation.

Get in touch

Quote a mould number

Paste the mould number, the metres and the destination into the enquiry and we will return price, lead time and carton data.

Request a quoteCompare the families

Quick answers

The questions buyers ask at this point

How many motorized curtain track profiles does IKSUN offer?

The current tooling list holds 38 motorized curtain track profiles, plus 4 additional dies for motor housings and accessories. Every IKSUN track body is quoted by its mould number, which is the die identification the factory uses, together with its theoretical mass per metre for freight calculation.

What do the curtain track profiles weigh per metre?

IKSUN track bodies run from 0.315 to 1.13 kilograms per metre; the lightest is mould CS101 and the heaviest is mould CP83. The theoretical mass per metre is published for every profile so importers can calculate freight and container loading before the quotation arrives.

Can a track body be ordered without a motor?

Part of the range can. 16 of the 38 track bodies are universal belt-drive profiles that are quoted without a motor, while the AT81 and the recessed built-in body are specified together with their drive system. Every IKSUN track body is quoted by its mould number, which is the die identification the factory uses, together with its theoretical mass per metre for freight calculation.

FAQ →