AT81
Curtain Control Master
Ceiling-mounted motorized track with integrated COB lighting
- 2.0 mm thickened rail
- Belt with stranded steel wires
- Upgraded transmission box
Electric curtain track range
Motorized curtain tracks: 38 profiles, four installation families
Choose by how the track is fixed and which motor it takes. Track bodies run from 0.315 to 1.13 kg per metre, so the profile you pick also decides your freight cost.
Models
Product pages
Built-in series
Recessed Built-in Motorized Track
Ceiling-pocket track in Somfy and Jialisi motor interfaces
- Two pocket sections
- Two motor interfaces
- Load-bearing section
WR510
WR510 Downward-Emitting Square Track
Square track with a downward-facing LED channel
- Downward light channel
- Two mounting positions
- Full accessory set per piece
Selection
Which family fits your window
Four conditions cover most of what buyers ask us for. Pick the row that matches your site and the page will give you the section, the limits and the packing.
| Site condition | Family | Why it fits |
|---|---|---|
| You want the light built into the curtain track | Integrated motor and light track | The AT81 pairs a 12 V light with the motor head, so one body lights and moves the drape. |
| You are building the track into a ceiling void | Recessed built-in track | The recessed body sits flush and takes Somfy or Jialisi motors. |
| You want an LED strip in a square aluminium profile | LED square track | The WR510 carries the light in a 31 mm square section with a 6.7 m single run. |
| You need the widest choice of sections | Belt-drive track profiles | The belt-drive range spans 38 profiles, all with published mass per metre. |
Families
The range in detail
Integrated motor and light track
One extrusion carries the belt drive and a built-in COB light strip, so no separate lighting channel is needed inside the curtain box.
Buyer question:: Can I get curtain control and cove lighting from a single track without a second light channel?
Recessed built-in track
Ceiling-pocket bodies made in two motor interfaces so the track is fully concealed when the curtain is open.
Buyer question:: Will the track vanish into a plasterboard pocket and still take the motor brand I already stock?
LED square track
A square-profile track with a downward-facing light channel, specified by the metre with the full accessory set.
Buyer question:: What section, lengths and carton quantity do I order for a lit square track?
Belt-drive track profiles
The full extrusion range that accepts a belt drive, quoted by mould number with the theoretical mass per metre published for every body so freight can be sized before the quotation arrives.
Buyer question:: Which profile number do I specify, and what will the shipment weigh?
What arrives in the carton
Standard bill of materials for one motorized track
The same configuration is issued across the motorized range. Quantities of sliding beads and drive belt follow the track length.
- 1 motor
- 1 remote controller
- 1 pair of transmission boxes
- 1 pair of carriers (sliding trolleys)
- 1 internal splice strip
- 2 stainless steel or plastic hooks
- 2 stainless steel end locks
- Ceiling brackets and second-layer brackets
- N sliding beads to the track length
- N metres of drive belt as a single run
These are typical bill-of-material lines for the motorized range. Exact contents vary by family and are confirmed on the quotation.
Key facts
The figures on this page, stated plainly
Of the 38 track bodies, 14 are produced for Jialisi drives, 8 for Somfy drives, and 16 are universal belt-drive profiles quoted without a motor.
The IKSUN motorized range is organised into four families: an integrated motor-and-light track (AT81), a recessed built-in track, an LED square track (WR510) and the belt-drive profile range.
Get in touch
Tell us the window and we will name the profile
Send the opening width, the ceiling construction and the motor you use. We will come back with the profile number, the section and the mass per metre.