Buyer guide
Recessed vs Surface Curtain Track | IKSUN
Two ways to hang a motorized curtain: build the track into the ceiling pocket so it vanishes when the curtain is open, or clip a surface track below the ceiling where the structure is already finished. Both use the same IKSUN belt-drive bodies, so the choice is about the ceiling, not the curtain.
Side by side
At a glance
| Dimension | Recessed built-in track | Surface-mounted track |
|---|---|---|
| Where it sits | Inside a 41.97 x 21.7 mm or 40 x 26 mm ceiling pocket | Clipped below the finished ceiling on brackets |
| What you see when open | Nothing - the track is hidden in the ceiling | A visible rail on the ceiling face |
| Ceiling height | Keeps full headroom, ideal for low ceilings | Drops the curtain line a few centimetres |
| Motor access | Somfy or Jialisi interface in the same body; reach via the pocket | Motor hangs below the ceiling, reachable from the room |
| Best for | New builds, hotels, minimalist interiors | Retrofits, existing ceilings, fast fit-out |
How to decide
What to weigh
The pocket is the constraint
A recessed track only works if the architect draws the pocket first. IKSUN makes the body in two ceiling-pocket sections, 41.97 x 21.7 mm and 40 x 26 mm, so it can match a pocket already on the drawing rather than re-cutting the ceiling.
Same drive either way
Both options run on the IKSUN belt-drive range - 16 universal profiles, plus Jialisi and Somfy configured bodies - so motor availability and lead time do not change with the mounting method.
Lighting can share the pocket
Where a recessed track is specified, the AT81 integrated light-and-motor extrusion can sit in the same ceiling detail, removing the need for a separate lighting channel.
Key facts
The figures on this page, stated plainly
The IKSUN recessed built-in track is produced in two ceiling-pocket sections, 41.97 x 21.7 mm and 40 x 26 mm, so it can match a pocket already drawn by a project architect.
The recessed built-in track body is made in Somfy and Jialisi motor interfaces, so a distributor can keep one motor inventory across projects.
Of the 38 track bodies, 14 are produced for Jialisi drives, 8 for Somfy drives, and 16 are universal belt-drive profiles quoted without a motor.
Questions on this guide
Answers buyers ask
Do I need a false ceiling for a recessed curtain track?
Only if the building does not already have a ceiling pocket. The IKSUN recessed body is made for pockets of 41.97 x 21.7 mm or 40 x 26 mm; if neither exists, a surface track is the faster route because it clips to the finished ceiling.
Can I still reach the motor with a recessed track?
Yes. The recessed built-in body is produced in Somfy and Jialisi motor interfaces on the same extrusion, so the motor is serviced from the ceiling pocket rather than from below the room.
Get in touch
Specify your curtain track
Send the profile or mould number, length and quantity - IKSUN returns price, lead time and carton data with the quotation.